View single post by goofieshot
 Posted: Sat Dec 10th, 2005 12:19 am
Full Topic
goofieshot

 

Joined: Tue Dec 6th, 2005
Location:  
Posts: 12
Status: 
Offline
H/F code - i have extended the drain hose and fastened it up above the machine before steering it into the drain, and successfully ran 3 loads in the row with no code. If that is all my problem, hopefully, then i thank you lots for your knowledge and assistance. I had the same setup of the machine for the past 2.5 years and did not experience this problem - frankly don't know why or what changed - but for the owners of similar units with an H/F code and a machine that is elevated with the addition of the pedestal - be aware that your discharge hose is now below the specified height if it drains to a standard height sink which in turn may cause intermittent H/F code.