View single post by Aventaclue
 Posted: Thu Apr 28th, 2005 02:19 pm
PM Quote Reply Full Topic


Joined: Wed Apr 27th, 2005
Posts: 2

I'm from Victoria in Oz and I have a F&P GW608 washing machine that's just started to take forever to fill. It has almost nothing running into the bowl when cold water is selected and eventually goes out on alarm with the warm and cold lights flashing.

I removed the hoses and checked them and there's no gunk in the filters on the hoses.

I checked the solenoid valves with a multimeter whilst varying the temperature settings and they seem consistent.

Nothing appears to be going into the water chamber the valves are attached to.

I changed the wiring from the hot to the cold valve and vice versa, and it fills. The cold water valve is sticking I presume.

Can someone tell me if these valves can be purchased seperately, if they are able to be pulled apart and 'cleaned', and how to remove them so I can do either of the options I have to do.

Thankyou very much in advance.