View single post by ScottyP
 Posted: Thu Oct 6th, 2005 08:46 pm
Full Topic


Joined: Tue Oct 4th, 2005
Location: Oxon Hill, Maryland USA
Posts: 15
My door hinges looked in good shape.  The door stops are not working because the cam riser were broken out and the door stops are now below the hinges (bypassing the hinge completely). The doors are free swinging due to the lack of a cam riser.  I guess when it broke, someone picked up the broken piece and threw it out (covering up evidence).  Children are so great to have around :?.

Im set now.  While waiting for parts, I will investage how to remove the freezer door to install the cam riser.  The water line runs thru bottom hinge and the electric harness thru the top hinge.  Both will need to be disconnected. It appears that after draining the water, the complete washer, riser & hinge must slide over the water line (without breaking, crimping or cracking it else water line replacement).  Must be a trick in doing this.

Thanks for all of your help.


Last edited on Thu Oct 6th, 2005 09:16 pm by ScottyP