View single post by Samurai Appliance Repair Man
 Posted: Sun Sep 25th, 2005 02:36 am
Full Topic
Samurai Appliance Repair Man

Joined: Mon Mar 21st, 2005
Location: Otterville, New Hampshire USA
Posts: 16083
Remove the top shelf inside the beer compartment so you can stick your head inside and turn it to the sky.  The ADC control is in the that top-most control compartment, right hand side.  Start by unplugging the refrigerator

There are two sets of screws,a Phillips pair, and another 1/4" pair, toward the front that need to be removed.  There's also a pair of 1/4" screws on the back way that need to come out.  This diagram might illustrate it better. 

Now, here's the tricky part.  To pull the control plate tray out, you need to pull the tray down and toward you at the same time.  It's tricky until you get the hang of it.  Remember: finesse, not force.  You're dealing with cheap plastic-- if you force it too much, it'll break. 

Need parts? Call our Parts Department now! 877-803-7957