View single post by dans1232
 Posted: Tue Oct 26th, 2010 08:23 pm
PM Quote Reply Full Topic
dans1232

 

Joined: Tue Oct 26th, 2010
Location:  
Posts: 12
Status: 
Offline
The dryer LED's turn on and the selector knob works fine. When I select a cycle and press start, the motor does not start. The LEDs on the front operate like the cycle has started. The drum and belt are intact. The motor spins freely and is not locked up (nor does it hum like its burnt up). I got codes 10 and 11 from the dryer.

When I press start, I can hear the relays opening and closing. I checked the voltages and ohms on the control board and all seem to be within their specs.