View single post by jceeetle
 Posted: Fri Oct 22nd, 2010 04:18 am
PM Quote Reply Full Topic
jceeetle

 

Joined: Thu Oct 21st, 2010
Location:  
Posts: 3
Status: 
Offline
A local repair shop attempted to replace my condenser fan and in the process he removed the wires from the control board harness connector that mates with the fan harness connector. He couldn't figure out how to put it back and eventually gave up. How hard can this be? I have the wiring diagram that was attached inside the refrigerator but it doesn't show enough detail to re-install the connector.

There are 4 wires on the fan: Red, White, Yellow, and Blue. There are only 3 wires in the harness that connects to the control board: Red, White, and Pink. Schematic says Red is 12VDC, White is Fan Common, and Pink is Condenser Fan. Schematic doesn't show the 4 wires between the fan motor and its harness connector. Only shows the Red, White, and Pink wires between control board and fan. The big question is what color wire from the control board mates with what color from the fan motor.

I would guess:
Red <> Red
White <> White

Is the 3rd connection:
Pink <> Blue
or
Pink <> Yellow