View single post by KurtiusInterupptus
 Posted: Mon Oct 11th, 2010 02:27 pm
PM Quote Reply Full Topic
KurtiusInterupptus

 

Joined: Fri Jan 12th, 2007
Location: Hickory, North Carolina USA
Posts: 459
Status: 
Offline
You can easily test the push switch by shorting the terminals it plugs into on the board. unplug the 2 wire connector and touch the terminals together with an insulated screwdriver. if it goes down(or up) you have your problem .



____________________
As every cockroach knows , thriving on poisons is the secret of success.