View single post by SANTA
 Posted: Sat Sep 25th, 2010 10:33 pm
PM Quote Reply Full Topic


Joined: Wed May 28th, 2008
Location: Two Harbors, Minnesota, Djibouti
Posts: 101
First, seat the rubber boot into the groove of the door, it will stay there. Then put the wire clamp on three quarters of the way from the 10 Oclock  position to the 6 Oclock position. Make sure the wire is properly in the groove. Then hold the 10 Oclock position of the wire with your right hand and the 6 Oclock position with your right knee and pull the spring apart with a hooked dental pick or similar type tool with your left hand and slip it into the rest of the door boot groove. It's so easy a caveman could do it but thats just my opinion.