View single post by acadiel
 Posted: Tue Sep 21st, 2010 01:35 am
PM Quote Reply Full Topic


Joined: Sun Jan 10th, 2010
Posts: 6
OK, see attached picture. I measured voltage at the top of the coil (at the tippity top, where there wasn't an insulator on the connector), and had the icemaker set to dispense. (The coil - where the red colored wire is on the left, and I believe orange on the right.)

No 120V. So, I'm guessing the board, right?

(Nope, don't know why the iPhone flipped the picture. <grin>;)

Attachment: photo-1.JPG (Downloaded 15 times)

Last edited on Tue Sep 21st, 2010 01:36 am by acadiel