View single post by appl.tech.29501
 Posted: Mon Aug 16th, 2010 05:00 am
PM Quote Reply Full Topic
appl.tech.29501



Joined: Sun Oct 7th, 2007
Location: South Carolina USA
Posts: 6784
Status: 
Offline
 If your water supply line to the dishwasher has a compression fitting then no, no tape. If your talking about the elbow fitting that goes into the water valve it should have tape on the valve side only.

So you have 2 wires coming from your power source to the dishwasher and 3 wires coming out of the dishwasher? should be black to black, white to white and green is your ground that connects to the dishwasher frame.



____________________
If you would like to make a donation you may do so at the link below

http://homepage.mac.com/zenzoidman/appl.tech.29501/