View single post by appl.tech.29501
 Posted: Sun Jul 18th, 2010 05:24 am
PM Quote Reply Full Topic
appl.tech.29501



Joined: Sun Oct 7th, 2007
Location: South Carolina USA
Posts: 6784
Status: 
Offline
ok, i went back and read the entire post. So you replaced the evap. thermistor because it was figured that it was causing the heater to stay on too long in return causing your ice to melt.

That's not exactly right in your situation. If it were allowing the heater to stay on too long then the evaporator wouldn't be clogged with frost as shown in your picture.

remove the defrost heater and OHM it....if it's open it's bad.



____________________