View single post by appl.tech.29501
 Posted: Sun Jul 18th, 2010 01:09 am
PM Quote Reply Full Topic
appl.tech.29501



Joined: Sun Oct 7th, 2007
Location: South Carolina USA
Posts: 6784
Status: 
Offline
Those are normal fluctuations for your unit depending on how often it was doing it and how long it would stay that way. From the looks of your coils in the picture that you posted you have a problem. Its not normal for the bottom 1/3 of the cols to be frosted as much as shown in that picture. Looks like your fan may have been bad from the get go.

The only thing that will make the coils look as yours did with really heavy frost on bottom and none on top is a gas leak ( which isn't the case because the unit was producing below 0 temps.) An air leak (door seal or dispenser flapper) or a whacky or broken fan) did you replace the evap. Thermistor or the freezer thermistor?



____________________
If you would like to make a donation you may do so at the link below

http://homepage.mac.com/zenzoidman/appl.tech.29501/