View single post by John Pilot
 Posted: Sat Sep 10th, 2005 01:32 pm
PM Quote Reply Full Topic
John Pilot

 

Joined: Thu Sep 8th, 2005
Location:  
Posts: 6
Status: 
Offline
I tested last night and the motor is getting the 21V when the Microwave is on and the motor is giveing a good OHM reading.  When I take the plate off it will turn the gear but when I put the plate back on the gear moves slightly then stops.

Hey by the way how do you get that gear off the motor.  you know the gear that matches up with the glass plate turntable? 

Thanks.