View single post by Pegi
 Posted: Sat Aug 20th, 2005 05:41 pm
Full Topic

Joined: Tue May 3rd, 2005
Location: Wichita Falls, Texas USA
Posts: 13120
This is from your tech sheet.  This washer will be under warranty if under one year old.  The circuit boards carry a two year warranty also.


Potential Causes

If there is no water in the unit:

Make sure that both valves at the water source(s) are turned on all

the way.

Check for plugged or kinked inlet hoses or plugged screens in the

inlet valves.

Verify inlet valve operation.

If there is water in the unit:

Verify Drain pump operation.

Verify that the Pressure Switch Hose is in good condition and

properly connected to Tub and Pressure switch.

Verify there is not a siphon problem.

Verify wire harness connections to; Inlet Valves, Pressure Switch,

Drain Pump, Flow Meter, and Central Control Unit (CCU).

Check all hoses for possible leaks.

Verify pressure switch operation.

Verify flow meter operation.

Verify CCU operation.

Need parts? Call our Parts Department now! 877-803-7957