View single post by pbjosh
 Posted: Thu Aug 18th, 2005 07:40 pm
PM Quote Reply Full Topic


Joined: Thu Aug 18th, 2005
Posts: 3

I have a GE Monogram Dishwasher (existing in the house when I bought it but approximately 5 yrs old) model number ZBD5700D01BB.

It seems to have malfunctioned during a normal wash cycle and now it seems to be stuck in "Heated Dry." I cannot use the clear button, or any other button, to change, pause or cancel the cycle. I tried holding buttons down for 2+ seconds (in case child proof mode was on somehow) also. I have tried to pause the Heated Dry by holding that button down as well.

I unplugged the dishwasher and left it unplugged overnight, but upon plugging it back in it goes into Heated Dry.

When it's on (and in Heated Dry) there is a whirring noise but no water entering or no other actions occuring inside the dishwasher. I have left it on for 30 minutes to see if it would cancel it's action or complete it's cycle or something but it did not. It also did not warm up inside the dishwasher (as I would expect "Heated" Dry to do heh).

Any tips or am I stuck with a $60 + parts/labor service visit?

Thanks much!