|View single post by Pegi|
|Posted: Thu Aug 18th, 2005 08:10 pm||
|Wonder if the dishwasher is in the rapid advance or diagnostic mode....read this from a the tech sheet where there is the 0 at the end of the model number to see if this is what it is doing.
RAPID ADVANCE SERVICE
FEATURE AND DIAGNOSTICS
Pressing the following option keys in the sequence shown will
either start the Diagnostics Cycle or turn on the Rapid
Advance feature for stepping through customer selectable
HI TEMP SCRUB, AIR DRY, HI TEMP SCRUB, AIR DRY
SANI RINSE, AIR DRY, SANI RINSE, AIR DRY
(Note: HI TEMP SCRUB = HI TEMP SCOUR)
(Note: AIR DRY = NO HEAT DRY = ENERGY SAVER DRY)
If the above key sequence is entered after starting a cycle,the
Rapid Advance feature is turned on, which allows the operator
to manually advance the currently running cycle, interval by
interval, by pressing the Pots&Pans/Heavy or Anti-Bacteria/
Cookware or Start key.
If the above key sequence is entered with the dishwasher in
Standby,the Diagnostics Cycle is started. The Diagnostics Cycle
can be rapid-advanced, interval by interval, by pressing
the Pots&Pans/Heavy or Anti-Bacteria/Cookware or Start key.
Note: The door must be closed before the Diagnostics cycle
will run. Likewise, the door must be closed after each rapid
advance selection of the P&P/Heavy, A-Bac/Cookware, or
Start key for the control to advance to the next interval of the
Diagnostics or currently running cycle.
DIYers: Save time and money by learning the secrets of appliance repair... Click Here!