 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | Thu Oct 15th, 2009 |
| Location: | |
| Posts: | 2 |
| Status: |
Offline
|
found these posts today. i have the fh error. it occurs when the machine is filled up about three inches on the door as above. not in c1, but in c2 and any wash cycle.
i have already replaced the flow meter and the pressure switch. i had no trouble blowing thru the tube from the switch end, and it was not plugged at the entry point to the basket. there were no pinches in the tube.
from what i have read, there is very little left to change...
fill valve assy??
i'd be very grateful for an idea.
thanks in advance.
dave