View single post by ltramon45

Posted: Tue Aug 25th, 2009 11:32 pm

Quote

Full Topic

ltramon45

Joined:	Mon Feb 16th, 2009
Location:	Ocoee, Florida USA
Posts:	56
Status:	Offline

The Thermal fuse ohm reading was 00.3 ohms. Its lightning really bad hear so I will wait on plugging in and checking the door switch

The Thermal fuse had continuity, but the Thermistor did not. these were tested with out the machine being plugged in.

Last edited on Tue Aug 25th, 2009 11:57 pm by ltramon45