|Joined: ||Thu Mar 23rd, 2006|
|Location: || |
|Okay still have the same washer and it will not pump out water, agitate or spin. Pulled the cab off, and removed the pump to make sure it was not jammed and motor would not spin. drive coupler is okay. took motor off of the transmission, and the motor would run in both in agitate and spin mode. I then removed the transmission and installed it onto the motor outside of the machine, and it works in spin and agitate mode. The motor was locked up and would not spin when inside the machine, just hum. this leads me to believe that the tranny and motor are fine. What do i check next?????