View single post by clman
 Posted: Mon Apr 27th, 2009 07:08 pm
PM Quote Reply Full Topic
clman



Joined: Thu Feb 7th, 2008
Location: Westwego, Louisiana USA
Posts: 69
Status: 
Offline
The retainer has a approx. 3" spring ( and hook ) at the 6 o'clock position under the groove on the gasket where it fits on the outter tub and the front door panel. Use the needle nose pliers as mentioned before. Make sure the gasket stays lined up and the retainer is firmly in it's groove. With experience it's still aggravating. The question is why are you changing the thermister. We have never had to change it. I assume this is not a washer dryer combo unit .

Last edited on Mon Apr 27th, 2009 07:12 pm by clman



____________________
25 Years in the biz. 9 years LG authorized.