View single post by hvacdrd
 Posted: Sat Apr 25th, 2009 03:53 am
PM Quote Reply Full Topic
hvacdrd



Joined: Wed Aug 16th, 2006
Location: Michigan USA
Posts: 1186
Status: 
Offline
You can check the ignitors/wiring by switching the output wires at the spark module. If the front ones work & back ones stop working, change out the module. If no change take a look at the ignitor(remove screw on bottom to remove ignitor), ignitor wire & ground wire by removing the burners.

click on pics

Spark module

     

Burner/ignitor                            



____________________
Tip Jar