View single post by Samurai Appliance Repair Man
 Posted: Mon Jan 19th, 2009 02:02 am
PM Quote Reply Full Topic
Samurai Appliance Repair Man



Joined: Mon Mar 21st, 2005
Location: Otterville, New Hampshire USA
Posts: 16083
Status: 
Offline
I always like to get some eyeballs on the actual drain discharge stream; make sure it's the same diameter at the hose and should be very strong.

Even with water spraying in during the drain cycle, that pump and drain system have way more than enough capacity to drain that water. Water entering the drum isn't the problem; the problem is not enough water leaving the drum.



____________________