|View single post by Will B. Fixed|
|Posted: Wed Oct 8th, 2008 10:15 pm||
Will B. Fixed
|Decided before I get into watching for needle twitches on a VOM I'd button it up and see what it's doing at this point.
Started it on heavy wash
Timer advanced on it's own from that setting
Just past the "light wash" hash mark, it pumped water IN at the same time it pumped water OUT, lasted longer than the 2mins and didn't seem correct so I moved it ahead by just 3 little clicks
It then pumped out the water as it did slow spin twice, followed by a fast spin
Then started pumping IN more rinse water
About 3/4 of the way between "light Wash" & "Final Spin" hash mark it seem to stall again. Lost track of the exact time, but seemed longer than any times on chart
I moved it ahead by 4 small clicks and it started to pump the water out
It was still trying to pump water out past 3 mins so I moved the knob ahead by just one click
Started to fill with next rinse for just over one minute and tumble started on it's own
After 4 minutes had to move ahead by hand one click
Started to pump water out with tumble action for 2 minutes
Fast spin started on it's own for 10 minutes
Dropped down to back and forth tumble for 2 1/2 minutes
Sounded the buzzer and unlocked the door.
Now, If we can just figure out why the timer is stalling at those points it would be a big step closer to fixed.
Any new thoughts now?