View single post by Crickettoo
 Posted: Sat Jul 12th, 2008 01:43 am
PM Quote Reply Full Topic


Joined: Fri Jul 11th, 2008
Posts: 4
I replaced the broken tumbler belt and everything seemed ok except where the belt comes up from the idler pulley towards the drum (ie. heading towards one o'clock), it rubs against the part of the belt right on the motor pulley (as well as against the metal guide on the idler pulley). From the pictures I've seen, there should be at least an inch between the belt  coming off the idler and where it's on the motor pulley.  I tried to attach a photo of my dryer to this message, but the file was too big. Thanks.