Budget Appliance Repair
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Apr 2nd, 2005 |
| Location: | Eureka, California USA |
| Posts: | 2870 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
You will need to purchase a stacking kit: CLICK HERE to see and/or order
The kit has the instructions that tell you what to do, it's real easy.
1) remove top (You already did that).
2) remove foam pad in middle
3) remove the two front clips, one on each side that the
front side of the top slides under and replace these
with the parts in the stacking kit.
4) remove the two brackets that are wedged into the top at
back that hold the top on, these will be used to lock
the dryer into place.
5) the dryer should have two plastic plugs at the bottom
in front, remove each of these plugs.
6) with a helper left the dryer on top of the washer making
sure the tabs of the stacking kit slide between the slot
of the front panel and the body of the dryer.
7) screw the two front holding screws in and replace the
plugs
8) take the two brackets you removed from the top and
install in back to lock dryer in place.
____________________
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501
|
