|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore Dryer Series 80 No Heat |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Kenmore Dryer Series 80 No Heat | Rate Topic |
| Author | Post |
|---|
| Posted: Sat May 14th, 2005 10:47 pm |
|
1st Post |
|
jdogchitown Grasshopper
|
Hello I have a Kenmore Series 80 Model # 110.77832795. The dryer runs but there is no heat. My question is where do I start my trouble shooting first. 2nd question is How do I access the Burner Assembly? I have removed the back panel off the dryer. I cannot figure out how to watch the burner assembley to see if it glows. Thanks
|
||||||||||||||
| |||||||||||||||
| Posted: Sun May 15th, 2005 12:50 am |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
jdogchitown wrote:My question is where do I start my trouble shooting first. Start with the help on this page. 2nd question is How do I access the Burner Assembly? The entire burner assembly is accessed by removing the front panel, disassembly help here. But you can watch the burner, without removing the front panel, through the inspection port on the front panel, below the door, to the left.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sun May 15th, 2005 06:09 am |
|
3rd Post |
|
Pegi Fellow, Academy of Sublime Masters of Appliantology 
|
If it is not heating at all, first check the ignitor mounted on the left side of the gas assy, it could be broken.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy at RepairClinic! 
|
||||||||||||||
| |||||||||||||||
Current time is 08:01 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore Dryer Series 80 No Heat | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
