|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Fisher Paykel GWL10 won't spin |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Fisher Paykel GWL10 won't spin | Rate Topic |
| Author | Post |
|---|
| Posted: Wed Nov 17th, 2010 01:02 pm |
|
1st Post |
|
rodgiddens Senior Apprentice Appliantologist
|
My GWL10 goes through all of the cycles but the rinse cycle never completes. The pump continues after all of the water is removed from the tub and the machine doesn't enter the spin cycle. As far as the diagnostic mode goes, either no lights are lighted or from left to right the first 4 are lighted, the fifth is not, six and seven are lighted number eight is blinking. Please point me in the right direction to solve this matter.
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 17th, 2010 01:54 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
243. (11110011) Phase 6 - Stepper Test Failure Rotor Position Sensor Fail. The Motor Control Module has attempted a motor step test and found the motor has not stepped to the correct position. Primary Fault: Wiring. Action: See fault codes 53 and 54. bunch'o manuals links PM'd
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 17th, 2010 02:33 pm |
|
3rd Post |
|
rodgiddens Senior Apprentice Appliantologist
|
RegUS Thanks for the quick response but the diag display is (11110111) last digit is blinking. Does that correspond with Rotor position failure?
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 17th, 2010 02:41 pm |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
don't know about the blinking .. I'm not a F&P master
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 17th, 2010 08:05 pm |
|
5th Post |
|
rodgiddens Senior Apprentice Appliantologist
|
RegUS_PatOff wrote: don't know about the blinking ..Thanks for your help. I'll see what happens.
|
||||||||||||||
| |||||||||||||||
Current time is 07:06 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Fisher Paykel GWL10 won't spin | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
