|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore Elite 110.27072600 Top Load |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Kenmore Elite 110.27072600 Top Load | Rate Topic |
| Author | Post |
|---|
| Posted: Mon Nov 15th, 2010 04:06 pm |
|
1st Post |
|
Wt2010Ac Grasshopper
|
Hello guys, I purchased a Kenmore Elite 110.27072600 Top Load on 06 and since last couple of months it is doing the spinning cycle very strange. No matter the size of load is, when it starts the high speed cycle I hear a big hitting sound inside, like when a pair of snickers is drying. I think whole tub is hitting the case/frame of the washer. Sometimes I get the clothes moved out a little bit and it runs ok at the second or third intent, but lately the problem is becoming worse. I called sears and they want charge me $250.00. I'm not sure if this is a good deal, I'm also very proactive doing mechanics (I can even repair head blocks of a car engine, etc), and just that appliances is new for me. I appreciate if someone can give me some input, what could be the problem, what part should I look for, etc. If there is a repair manual it will be a great idea to have a copy. Thank you!
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Nov 15th, 2010 11:19 pm |
|
2nd Post |
BLTH15
|
wt-the part you need is the tub w/ shaft. manufacturer part #w10128830. price is $200-$250 depending on wich site you use. this site is out of stock. i'd have sears do it for the $50-60 difference.
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Nov 16th, 2010 12:22 am |
|
3rd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
http://applianceguru.com/forum9/28432.html
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Tue Nov 16th, 2010 06:38 pm |
|
4th Post |
|
Wt2010Ac Grasshopper
|
Thank you for the answers. I got a video taped yesterday to better illustrate the problem. here is it. Thanks
|
|||||||||||||
| ||||||||||||||
| Posted: Tue Nov 16th, 2010 09:13 pm |
|
5th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
Never seen a bad outer tub cause that reaction. Looks to me like you have bad shocks.... Maybe someone can explain the outer tub theory
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 17th, 2010 11:14 pm |
|
6th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Pop the hood and make sure all the support struts are in place. Put the machine into diagnostic mode and see if there are any error codes stored there.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sat Nov 20th, 2010 12:16 am |
|
7th Post |
|
Wt2010Ac Grasshopper
|
Thank you to all for the tips. I actually ran the machine in diagnostic mode and there is no fault code stored. In addition, I want say the problem come up while the washer runs the mini cicle to rebalance the load, just before the spin cicle. It looks like the machine goes unbalance, then I see the code uL. Any tip on this please. Thanks!
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Nov 20th, 2010 12:34 am |
|
8th Post |
|
kdog Fellow, Academy of Sublime Masters of Appliantology 
|
My guess is that the plastic hub under the basket has somehow been comprimised RepairClinic part #1200151  Last edited on Sat Nov 20th, 2010 12:43 am by kdog ____________________ Can Ye spare some 'cutter me brutha ? http://web.me.com/zenzoidman/kdog/ |
|||||||||||||
| ||||||||||||||
Current time is 04:40 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore Elite 110.27072600 Top Load | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
