|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Frigidaire Gallery Front Load Washer |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! | Page:   1 2 |
|
||||||||||||
| Frigidaire Gallery Front Load Washer | Rate Topic |
| Author | Post |
|---|
| Posted: Wed Nov 3rd, 2010 09:07 pm |
|
21st Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
cjwilson wrote: OK. Can you send me the list of checks to do with the meter? In the mean time I'll go and try the spin test. tesh sheets posted earlier ..
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 3rd, 2010 09:18 pm |
|
22nd Post |
|
cjwilson Grasshopper
|
It's there. The first test said to check pins 5 and 6 for voltage on the speed control unit. I checked and have 30 volts.
|
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 3rd, 2010 09:48 pm |
|
23rd Post |
|
cjwilson Grasshopper
|
resistance on the speed control board: pins 1 and 2 = .560, pins 2 and 3 = .612, and pins 1 and 3 = .620. All taken on 2m scale. Literature says to replace speed control board if readings other than 3m.
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 3rd, 2010 09:53 pm |
|
24th Post |
|
cjwilson Grasshopper
|
I get consistent 1.3 ohms on all 3 pins at the harness for the motor.
|
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 3rd, 2010 11:43 pm |
|
25th Post |
|
cjwilson Grasshopper
|
I was getting some fuzzy readings off the meter, even when I plugged it in to a known power source, so I switched meters. Step 3 of the literature says to check for voltage between the 10 pin and pin 5 of the 6 pin. My results are as follows: I have 120 volts at 1,5,6 and 9.
|
||||||||||||||
| |||||||||||||||
Current time is 05:58 am
|
Page: 1 2 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Frigidaire Gallery Front Load Washer | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
