|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 |
|
|
|||||||||||||
| GEW9200LW1 Duet Dryer | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Nov 3rd, 2009 01:23 am |
|
1st Post |
|
growmoreflowers Senior Apprentice Appliantologist
|
Good evening. Dryer quit. Followed the prompts to check continuity on Thermal fuse. Continuity is good. What to check next? No error codes on display, is unlocked, all buttons work (display changes, lights work, lock works.) Is there a troubleshooting mode for this control panel (duet version 1, from the dark ages)? My apologies for any redundancy--couldn't find any other posts with the same problem. Thanks, Nancy
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Nov 3rd, 2009 01:56 am |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
My 5 yr old says: "Check the Child Lock function. To turn ON or OFF, press and hold the End Of Cycle Signal button for 3 seconds."
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 4th, 2009 04:01 am |
|
3rd Post |
|
K,man Sublime Master of Appliantology
|
3 beeps means the door switch is not closed,,,either the door need pushing in at the top or the switch is bad
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 4th, 2009 07:59 pm |
|
4th Post |
|
growmoreflowers Senior Apprentice Appliantologist
|
Thanks K,man. Will pull switch and check when I get home. Although a sound thrashing with a 2x4 would be more fun! ****3 hours later.......****** Took top off, checked continuity at P2/P3 - flaky. Pulled switch, checked continuity at switch, fine. So cleaned contacts, reassembled, checked again at P2/P3. BINGO! Resistance much better and Open/Closed reliable. Switch in, top on, clothes go round and round. Life is gooder with tumbled jeans. The airdried ones are so scratchy, y'know??! BTW--I'm willing to scan the tech sheets into PDF's for your files if you need 'em. Let me know. Happy Hump Day! Nancy Last edited on Thu Nov 5th, 2009 01:57 am by growmoreflowers |
|||||||||||||
| ||||||||||||||
| Current time is 03:55 pm | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > GEW9200LW1 Duet Dryer | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com
