|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Replaced LG Hall Sensor and still won't run???? WM2277HS |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 |
|
|
|||||||||||||
| Replaced LG Hall Sensor and still won't run???? WM2277HS | Rate Topic |
| Author | Post |
|---|
| Posted: Thu Oct 22nd, 2009 08:58 pm |
|
1st Post |
|
lariatorgco Grasshopper
|
 I read the posts on replacing the Hall Sensor ad everything appeared to be right along that alley. Still won't work. I checked all the connections and they are lubricated and snug. I verified power to the filter assembly and Main PWB and I get 120V. I ordered and replaced the hall Sensor in the back. Can anyone help me with this one? I am thinking it is the Main PWB, but not sure there might be something else?Also, no light on at the Main PWB. Last edited on Thu Oct 22nd, 2009 09:06 pm by lariatorgco |
||||||||||||||
| |||||||||||||||
| Posted: Thu Oct 22nd, 2009 09:29 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
did you do any tests in the WM2277 Service Manual ?
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Posted: Thu Oct 22nd, 2009 09:34 pm |
|
3rd Post |
|
NCSU_laundry_tech Sublime Master of Appliantology 
|
what are symptoms?
____________________ To alcohol! The cause of... and solution to... all of life's problems. Doc Watson - Shady Grove: http://www.youtube.com/watch?v=b-kaG1NuLZM riding my dirtbike in clayton NC: http://www.youtube.com/watch?v=NnCmY0vzmYM |
||||||||||||||
| |||||||||||||||
| Posted: Thu Oct 22nd, 2009 10:19 pm |
|
4th Post |
|
lariatorgco Grasshopper
|
When I say nothing, it means not even a read out. I did the QC tests and nothing. I pushed the spin and soil buttons simultaneously and then the power button. nothing. i took the cover off of the main Pwb and rmoved every connector, then after 10 minutes replugged them back in and nothing. When I spin the inside of the drum, the red light will illuminate on the main pwb. Right now, i am waiting 10 minutes after spinning the drum then i will replug in and try again. I, also, cleaned out the 12 o'clock hose and removed all of the lint or dirt.
|
|||||||||||||
| ||||||||||||||
| Posted: Fri Oct 23rd, 2009 02:15 am |
|
5th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
lariatorgco wrote: ... Main PWB and I get 120V.... from pin 1 to pin 3 of the White PWB Power Connector ?
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
||||||||||||||
| |||||||||||||||
| Posted: Fri Oct 23rd, 2009 02:45 am |
|
6th Post |
|
lariatorgco Grasshopper
|
yes
|
|||||||||||||
| ||||||||||||||
| Posted: Fri Oct 23rd, 2009 02:57 am |
|
7th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Is the LED on the main power board lit?
____________________  If I've helped you with your repair, please consider supporting my flavorite charity: http://beer.fixitnow.com |
||||||||||||||
| |||||||||||||||
| Posted: Fri Oct 23rd, 2009 03:22 am |
|
8th Post |
|
lariatorgco Grasshopper
|
the LEd red light only illuminates temporarily when I spin the drum regardless of power.
|
|||||||||||||
| ||||||||||||||
| Posted: Fri Oct 23rd, 2009 06:08 am |
|
9th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
lariatorgco wrote: the LEd red light only illuminates temporarily when I spin the drum regardless of power. note: common on LG's, even with power disconnected ...
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
||||||||||||||
| |||||||||||||||
| Posted: Fri Oct 23rd, 2009 09:34 am |
|
10th Post |
|
lariatorgco Grasshopper
|
So what do you think? anyway i can test the main pwb at this stage?
|
|||||||||||||
| ||||||||||||||
| Current time is 05:45 am | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Replaced LG Hall Sensor and still won't run???? WM2277HS | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com
