|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore 70 Series Washer |
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Kenmore 70 Series Washer | Rate Topic |
| Author | Post |
|---|
| Posted: Thu Jun 23rd, 2005 02:55 pm |
|
1st Post |
|
jkennedy Senior Apprentice Appliantologist
|
Washer model # 26712690 Direct Drive - Will not agitate or spin. It will drain. HELP
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Jun 23rd, 2005 09:52 pm |
|
2nd Post |
|
Pegi Fellow, Academy of Sublime Masters of Appliantology 
|
You have broken the coupler between the motor and transmission. Remove the case, pull the pump and motor and replace this coupler.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy at RepairClinic! 
|
|||||||||||||
| ||||||||||||||
| Posted: Fri Jun 24th, 2005 05:36 am |
|
3rd Post |
|
jkennedy Senior Apprentice Appliantologist
|
Master, Thanks to your step-by-step pics, I figured out to pull the washer apart. My next questions: how do I pull the pump and motor and what does a broken coupler look like? Thank you , Joy
|
||||||||||||||
| |||||||||||||||
| Posted: Fri Jun 24th, 2005 06:10 am |
|
4th Post |
GLC
|
Look at the last four pics on this page and that should help ya. http://groups.msn.com/Appliantology/washers.msnw?Page=3 what you are going to do is use a flat blade screw driver and remove two clips holding the pump onto the motor. Leave the hoses hooked up. Tie the pump off to the left with a wire coat hanger to keep it out of the way. Take two more longer clips off that hold the motor in place. Please Make sure the unti is unplugged from the wall. You will see one side of the coupler on the motor shaft and another side of the coupler on the transmission shaft. The rubber may be stuck on either side. You are goingto replace all this and line it all back up and mount it back together and TA DA your done. another good shot http://fixitnow.com/appliantology/wplddcoupler.htm
____________________ Unless specifically asked otherwise, remember to test with the unit unplugged, or breaker off. CLICK HERE TO BUY PARTS Appliance Repair In Maryland http://serviceeveryday.com |
|||||||||||||
| ||||||||||||||
Current time is 12:47 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Kenmore 70 Series Washer | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
