|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
|
| Moderated by: RegUS_PatOff, BrntToast, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Maytag Neptune - 1999 | Rate Topic |
| Author | Post |
|---|
| You have chosen to ignore DoneInByNeptune. click Here to view this post |
|---|
| Posted: Mon Apr 11th, 2005 02:32 am |
|
2nd Post |
|
mastertech011 Scholar of Advanced Appliantological Studies
|
Have you checked for clogged hoses before and after the pump? I think the wise one would tell you to first look for panties stuck in the hose or pump itself. This of course assuming the control board and motor have not fried again.
|
|||||||||||||
| ||||||||||||||
| Posted: Mon Apr 11th, 2005 10:30 am |
|
3rd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
DoneInByNeptune wrote: we have stinking standing water in the tub after every wash. We have replaced the "famed" circuit board and latch along with the pump (twice). Does the washer spin? Usually, if there's standing water in the drum, the washer will not spin. As to why there's standing water, Mastertech pointed you in the right direction. If I were on the service call, I'd set the washer to fill and then advance it to spin while holding the discharge hose just out of the drain pipe so I can watch the stream. If it's anemic or not the same diameter as the drain hose, then I know I have a restriction issue, probably panties in the suction hose of the pump. Easy fix.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
||||||||||||||
| |||||||||||||||
Current time is 02:59 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Laundry Appliance Repair Forum > Maytag Neptune - 1999 | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
