|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Heating, Ventilation, and Air Conditioning (HVAC) > TempStar DC90 Starts/Stops/starts |
|
| Moderated by: RegUS_PatOff, dkpd1581, applianceman18007260692 | Search Our Sites for More Info! |
|
|||||||||||||
| TempStar DC90 Starts/Stops/starts | Rate Topic |
| Author | Post |
|---|
| Posted: Sun Aug 31st, 2008 10:35 pm |
|
1st Post |
|
mosleyh Senior Apprentice Appliantologist
|
I just bought a house that has a TempStar DC90 as the main floor A/C unit. The thermostat is a Hunter 44668. When the A/C cycles on, I hear the relay click in the thermostat, and the A/C comes on normally. 30 to 60 seconds later, the A/C goes off for a second or less, then immediately comes back on. I DO NOT hear the relay in the thermostat kicking on or off when this happens. It only seems to happen one time after the thermostat turns the unit on. After the one extra off/on it runs normally until it gets to the set temperature. Any idea what's going on? Thanks
____________________ Mosley Hardy |
||||||||||||||
| |||||||||||||||
| Posted: Mon Sep 1st, 2008 11:17 am |
|
2nd Post |
|
TOPPS Appliance Service Master Appliantologist
|
mosleyh wrote: I just bought a house that has a TempStar DC90 as the main floor A/C unit. The thermostat is a Hunter 44668. When the A/C cycles on, I hear the relay click in the thermostat, and the A/C comes on normally. 30 to 60 seconds later, the A/C goes off for a second or less, then immediately comes back on. I DO NOT hear the relay in the thermostat kicking on or off when this happens. It only seems to happen one time after the thermostat turns the unit on. After the one extra off/on it runs normally until it gets to the set temperature. Can you locate the m/n or post the schematic? Sounds like a blower issue.
____________________ TOPPS Appliance Service Toledo's "TOPP" Choice http://www.TOPPSappliance-service.com |
|||||||||||||
| ||||||||||||||
| Current time is 08:51 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Heating, Ventilation, and Air Conditioning (HVAC) > TempStar DC90 Starts/Stops/starts | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com