|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home |
Konnichiwa and Welcome!Please register or watch this short screencast on how to get started here.
|
| Moderated by: RegUS_PatOff, Pegi, hvacdrd, applianceman18007260692 |
|
|
|||||||||||||
| Rheem Parts | Rate Topic |
| Author | Post |
|---|
| Posted: Sun Jun 3rd, 2007 12:38 pm |
|
1st Post |
|
esquire12 Senior Apprentice Appliantologist
|
Anyone know where to get Rheem parts online? Need a defrost relay
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Jun 3rd, 2007 02:37 pm |
|
2nd Post |
|
edwardh1 Senior Apprentice Appliantologist
|
Rheem in our area is sold by plumbing houses which do not give it much attention- some store front type dealers but many small / hack installers
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Jun 3rd, 2007 07:06 pm |
|
3rd Post |
|
dkpd1581 Sublime Master of Appliantology 
|
If all it is is a relay...you should be able to get a generic Essex style relay and wire it in....may not necessarily have to be brand specific. Just verify the coil voltage. If that is the case, any parts house, electrical house, or plumbing/HVAC shop should have it.
____________________ Take a minute to visit me at: https://sites.google.com/site/dkpd1581/ |
||||||||||||||
| |||||||||||||||
| Posted: Sun Jun 3rd, 2007 07:59 pm |
|
4th Post |
|
esquire12 Senior Apprentice Appliantologist
|
The one in the parts house has 3 contacts. 3 double contacts. Mine has 2 double contacts and 1 single. Will that make a difference? Both are enclosed in a clear plastic box. Thanks
|
|||||||||||||
| ||||||||||||||
| Posted: Mon Jun 4th, 2007 07:41 pm |
|
5th Post |
|
dkpd1581 Sublime Master of Appliantology
|
#1 make sure the coil voltages are the same in the old and the new one you are looking at. Is it 24 vac, 120 vac 208/230. #2 check your old diagram to see how many switches you need and if they are normally open or normally closed. #3 verify that the new generic one has enough of the switches normally open or normally closed #4 wire away and test out the unit.
____________________ Take a minute to visit me at: https://sites.google.com/site/dkpd1581/ |
||||||||||||||
| |||||||||||||||
| Posted: Tue Jun 19th, 2007 11:57 pm |
|
6th Post |
|
applianceman18007260692 Sublime Master of Appliantology 
|
Thats ok it has an extra leg in case ye need another one son just leave the extra pole unhooked and all will be fine,,,,aint this a good forum?
____________________ "May the hinges of our friendship never grow rusty" Old Irish Saying |
|||||||||||||
| ||||||||||||||
| Current time is 04:23 pm | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > Heating, Ventilation, and Air Conditioning (HVAC) > Rheem Parts | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Home
