| Author | Post |
|---|
Traveler4921
Grasshopper
| Joined: | Sat Jun 10th, 2006 |
| Location: | |
| Posts: | 8 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
Posted: Thu Jun 15th, 2006 22:43 |
|
I have the Kemore Access Plus chest freezer model 183.13401. It has a regular chest compartment on the top and a pull out drawer on the bottom. I purchased it new Nov 03 from Sears.
The top compartment freezes well and I have had no problems. Regular frost buildup and I keep it medium full to full. The drawer, however, won't even freeze bread. I don't want to put things in there for the fact that they will spoil. The label inside recommends using the drawer for ice cream, I think not.
It has one temperature control which is set at medium to high freezing. The "Fast Freeze" option is tuned off. What can cause the top to freeze and the bottom no too?
Thanks much!
|
Pegi
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Tue May 3rd, 2005 |
| Location: | Wichita Falls, Texas USA |
| Posts: | 12214 |
| Flavorite Brew: | Sweet Iced Tea |
| Status: |
Offline
|
|
Posted: Thu Jun 15th, 2006 23:01 |
|
| Strange, have heard of these but not seen one...full model number is 183.13401300, looked it up on the sears site, do not recognize who made this by the part numbers RF-0000-000 perhaps others will know who the source is for 183 and have a clue about the problem....have you called for warranty service on this unit??? That is what I would do since it is not working right and would not want to void the warranty by going into it...
____________________
Moderator & Assistant Admin. for Servicetechhelp Associaton, Inc.
http://www.servicetechhelp.com
http://www.servicetechhelp.com/REGISTRATION.php
|
Traveler4921
Grasshopper
| Joined: | Sat Jun 10th, 2006 |
| Location: | |
| Posts: | 8 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
Posted: Thu Jun 15th, 2006 23:56 |
|
Thanks for the speedy reply Pegi! It is labeled Kenmore, but I know a lot of things are.
It is a spiffy set up as you don't have to do a deep waist bend to get at the things in the bottom of the compartment. Too often things get "lost" on the bottom.
I joked when I bought it, I chose that one because of the 2 storage areas, my husband couldn't sneak up behind me and push me in, I wouldn't fit!
I was hesistant to call for service as I only paid $200 and it might be more than that to have a service call. What do you think??
|
Pegi
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Tue May 3rd, 2005 |
| Location: | Wichita Falls, Texas USA |
| Posts: | 12214 |
| Flavorite Brew: | Sweet Iced Tea |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 00:10 |
|
""I purchased it new Nov 03 from Sears.""' I was assuming this should be under full warranty. Was guessing this was Nov. 03, 2005, but I now see this is perhaps 2003??? So I might have mis-undrstood the purchase date...yes, might cost more than the price of the unit...what with the service call and labor...is sad this was not checked when in warranty..
____________________
Moderator & Assistant Admin. for Servicetechhelp Associaton, Inc.
http://www.servicetechhelp.com
http://www.servicetechhelp.com/REGISTRATION.php
|
Traveler4921
Grasshopper
| Joined: | Sat Jun 10th, 2006 |
| Location: | |
| Posts: | 8 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 00:48 |
|
There is a 5yr warranty on the compressor, the sealed system (refrigerant, evap and condenser) I did buy in Nov 03, so it is under warranty for those things.
I would be thrilled if it were one of those, do you imagine it is? The 1yr warranty is on "all other parts or adjustments"
I appreciate your help, I would like to use that drawer for more than decor 
|
Pegi
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Tue May 3rd, 2005 |
| Location: | Wichita Falls, Texas USA |
| Posts: | 12214 |
| Flavorite Brew: | Sweet Iced Tea |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 00:54 |
|
| This will all depend on if the labor is covered, usually is only one year, check you warranty for labor coverage??
____________________
Moderator & Assistant Admin. for Servicetechhelp Associaton, Inc.
http://www.servicetechhelp.com
http://www.servicetechhelp.com/REGISTRATION.php
|
Pegi
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Tue May 3rd, 2005 |
| Location: | Wichita Falls, Texas USA |
| Posts: | 12214 |
| Flavorite Brew: | Sweet Iced Tea |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 03:50 |
|
| Suspect this freezer was made by Haier??? Sort of looks like it. huh?
____________________
Moderator & Assistant Admin. for Servicetechhelp Associaton, Inc.
http://www.servicetechhelp.com
http://www.servicetechhelp.com/REGISTRATION.php
|
Traveler4921
Grasshopper
| Joined: | Sat Jun 10th, 2006 |
| Location: | |
| Posts: | 8 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 04:26 |
|
It does look like it, but mine is a 4.8cu ft.
I made an appt with Sears for them to take a look tomorrow, I will post what I found out.
Thank you for your time and research!
|
Budget Appliance Repair
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Sat Apr 2nd, 2005 |
| Location: | Eureka, California USA |
| Posts: | 1897 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 12:25 |
|
Deffinitely a Haier "183.Haier"
See this page: CLICK HERE for a very clear and organized chart of who makes what for Sears.
____________________
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501
|
Pegi
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Tue May 3rd, 2005 |
| Location: | Wichita Falls, Texas USA |
| Posts: | 12214 |
| Flavorite Brew: | Sweet Iced Tea |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 18:38 |
|
| Cool, they have updated the list, mine was older...thanks..
____________________
Moderator & Assistant Admin. for Servicetechhelp Associaton, Inc.
http://www.servicetechhelp.com
http://www.servicetechhelp.com/REGISTRATION.php
|
Mad Mac
Fellow, Academy of Sublime Masters of Appliantology
|
Posted: Fri Jun 16th, 2006 19:06 |
|
| Haier badged as Kenmore...Sears & Roebuck will be spinning in their graves at this very moment.
____________________
Mad Mac....Pray to God he's out there....somewhere.
|
Pegi
Fellow, Academy of Sublime Masters of Appliantology
| Joined: | Tue May 3rd, 2005 |
| Location: | Wichita Falls, Texas USA |
| Posts: | 12214 |
| Flavorite Brew: | Sweet Iced Tea |
| Status: |
Offline
|
|
Posted: Fri Jun 16th, 2006 19:21 |
|
Yea, scary stuff.....however if it had the Haier name on it might be harder to get some one to work on it and get parts, no one here will touch Haier products..but with the Kenmore name on the unit, well Sears has to work on it and get parts...this might be good for the customers...
____________________
Moderator & Assistant Admin. for Servicetechhelp Associaton, Inc.
http://www.servicetechhelp.com
http://www.servicetechhelp.com/REGISTRATION.php
|
Traveler4921
Grasshopper
| Joined: | Sat Jun 10th, 2006 |
| Location: | |
| Posts: | 8 |
| Flavorite Brew: | |
| Status: |
Offline
|
|
Posted: Sat Jun 17th, 2006 22:40 |
|
Wow, you make it sound like Haier is the kiss of death in the appliance world ...... The Sears fella came, didn't bat an eyelash when he saw the unit. He showed where the frost builds up (not indicated at all in the owners manual). Since this has the drawer the cooling coils are between the chest compartment and the drawer. They cool up to the compartment, down to the drawer. The drawer was not seating properly (and had probably been that way since I got it) so an incredible amount of frost was building on the coils.
Now that I have had an education on all kinds of frost and the flakes it makes, and where the darned coils are, plus he adjusted the door, it is looking good, but still not freezing bread solid. Hmmmm.
|
WayneSB
Apprentice Appliantologist
| Joined: | Sat Jun 16th, 2007 |
| Location: | |
| Posts: | 33 |
| Flavorite Brew: | Rum & Pepsi |
| Status: |
Offline
|
|
Posted: Wed Dec 19th, 2007 17:54 |
|
Wow, you make it sound like Haier is the kiss of death in the appliance world
I'm not a technician. Just in sales. Even so, we've seen so many problems with Haier that we refuse to sell their products. Avanti is another brand that we won't sell anymore after getting burned over and over. Implied warranty laws hurt when people insist on buying junk.
|
Current time is 13:44 | |
|
