|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > jenn-air double wall oven m# |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| jenn-air double wall oven m# | Rate Topic |
| Author | Post |
|---|
| Posted: Sun Nov 7th, 2010 05:04 pm |
|
1st Post |
|
Devil505 Grasshopper
|
I'm working on a wall oven that was showing codes f4 and ff. they refer to the temp. sensor/ harness and power relay board. I've replaced both sensors and the prb. now the ff code is gone but the sensors are still showing codes. I've ohm'd the harnesses (they are fine) and the sensors. The new sensors don't show continuity, my question is should they show continuity or not. If so then I'd have 2 new sensors bad out of the bag, or is the fact that my board is bad out of the box? I don't have the model handy so any general help would be appreciated.
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Nov 7th, 2010 08:25 pm |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
Never quite made it to the model number in the title, budrow. Go ahead and post that.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Mon Nov 8th, 2010 12:35 pm |
|
3rd Post |
|
Trying to help Fellow, Academy of Sublime Masters of Appliantology 
|
Sensors will not show Continuity, they will show an ohm resistance of approximately 1100 at room temp.
____________________ If we saved YOU Beer $$ today, please make a donation to our beer fund by clicking the link below to help keep this site going. I charge $135.95 PLUS PARTS to do this repair!$! http://fixitnow.com/beerfund.htm |
||||||||||||||
| |||||||||||||||
| Posted: Mon Nov 8th, 2010 06:24 pm |
|
4th Post |
|
Devil505 Grasshopper
|
Ok got the model number: ww30430p Jenn air double wall oven. I've since found out the the sensors are good and what i'm probably looking at is a bad board from the factory. Any other ideas?
|
|||||||||||||
| ||||||||||||||
| Posted: Mon Nov 8th, 2010 06:26 pm |
|
5th Post |
|
Devil505 Grasshopper
|
BTW thanks for your help guys
|
||||||||||||||
| |||||||||||||||
Current time is 05:51 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > jenn-air double wall oven m# | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
