|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > maytag mzd2766geb ,1010 serial no |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| maytag mzd2766geb ,1010 serial no | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Nov 2nd, 2010 04:11 pm |
|
1st Post |
|
paykel190 Grasshopper
|
Compressor runs and fan on compressor runs and sounds good. Your help is appreciated
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Nov 2nd, 2010 04:31 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
paykel190 wrote: not getting cold neither Freezer nor Fridge ? may need to have a look at the frost pattern of the Evaporator Coils and post a picture somewhere http://www.imageshack.us/ then post the link here
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Wed Nov 3rd, 2010 04:40 am |
|
3rd Post |
|
paykel190 Grasshopper
|
Freezer is not cold and fridge is not cold felt the lines after 20 min hi side small copper line is warm to hot the low side bigger copper tube is a little cold further away from compressor. There are three lines 2 on the right side and one crimp line on the left, if I add freon I forget which line I add it too can it go in the tube on the left side that is crimp or should I just fill on the rt side the bigger copper tube Just like on a car ac system. I was told don't ever fill on the high side. since there is no fill valve im going to use a peircing valve what size would I need? I can post pictures if that helps. Thank you
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Nov 3rd, 2010 07:10 am |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
RegUS_PatOff wrote: may need to have a look at the frost pattern of the Evaporator Coils
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
Current time is 12:20 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > maytag mzd2766geb ,1010 serial no | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
