- Home


Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters

FAQs | Contact | Apprenticeship | Parts | Model Number Help | Newsletter | Beer

Find Appliance Parts & Diagrams Here
Enter a model number, part number, type of appliance, brand, or even a part description.

365-day return policy on all parts ordered through this site!


 Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 Search Our Sites for More Info!
New Topic Reply Printer Friendly
GE Profile side by side PSC23SGRC ss  Rate Topic 
AuthorPost
 Posted: Tue Nov 2nd, 2010 06:10 am
  PM Quote Reply
1st Post
paykel190
Grasshopper
 

Joined: Sun May 4th, 2008
Location:  
Posts: 19
Flavorite Brew: hot coca
Status: 
Offline
What its doing is the temp control board is blinking along with dispenser board.  I'm able to get the  display lit up with  off showing after I pressed the 2 buttons on the left  side and pressed the turbo cool then raised the tempature at the same time after that the display stayed lit  , then I adjusted temp to be 4 and then compressor tryed to start then stopped. what could be causing this can you give me schematics  for the  mainboard and tempature board at the top of the fridge section?  Oiginally showing tempature and the lcd was bright dim bright dim then the display shows nothing have to press left side cold button and display comes back on then goes off. I need to know if both boards are bad or just one. I checked the  relay/overload box on compressor and it has a rattle when I shook it.  After reinstalling temp control board I could not get it to show any digits on the display except the bottom  led  labled set. I did see schamatics posted for ge profile but that link is bad. thank you in advance

 

Back To Top PM Quote Reply  

 Posted: Tue Nov 2nd, 2010 09:36 am
  PM Quote Reply
2nd Post
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology


Joined: Sat Sep 24th, 2005
Location: Milwaukee, Wisconsin USA
Posts: 16509
Flavorite Brew: Indian Head. Black & White
Status: 
Offline
depending on the first 3 characters of your serial number,
there may be a recall on the MotherBoard 

For service manuals and lots of other goodies, become an Apprentice==>
http://apprentice.applianceguru.com



Uploaded with ImageShack.us




____________________
The new repair forums==> http://appliantology.org
Back To Top PM Quote Reply

 Posted: Tue Nov 2nd, 2010 02:47 pm
  PM Quote Reply
3rd Post
paykel190
Grasshopper
 

Joined: Sun May 4th, 2008
Location:  
Posts: 19
Flavorite Brew: hot coca
Status: 
Offline
HI the first three of the serial is DH4   Has this been recalled. Would the compressor not start if the overload relay is bad it tryed to start up then shut down?

Back To Top PM Quote Reply  

 Posted: Tue Nov 2nd, 2010 04:25 pm
  PM Quote Reply
4th Post
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology


Joined: Sat Sep 24th, 2005
Location: Milwaukee, Wisconsin USA
Posts: 16509
Flavorite Brew: Indian Head. Black & White
Status: 
Offline
nope, not on the recall, although the Start Relay rattle usually isn't good



____________________
The new repair forums==> http://appliantology.org
Back To Top PM Quote Reply

 Posted: Wed Nov 3rd, 2010 05:01 am
  PM Quote Reply
5th Post
paykel190
Grasshopper
 

Joined: Sun May 4th, 2008
Location:  
Posts: 19
Flavorite Brew: hot coca
Status: 
Offline
I changed out relay/ overload and same thing compressor try to start up then shuts off I hear no click. Also the hrs led is constantly blinking could that be some kind of fault code.  That temp control board at the top of fridge is blinking along with the dispenser.  I can adjust the fridge or freezer temp on display does this sound like a main board failure? I looked at schematics and they have no volt readings on them for the  connectors  with out any voltage readings I cant test the board. I was able to get temp to display off on fridge and freezer then raise temp and compressor tried to start for 1 or 2 sec.  The temp board shows temps blinking bright dim bright dim then whole display turns off.  I hear the water dispencer and the lights are on and no evap fan is on in freezer.  I hope its not both boards.  thank you

Back To Top PM Quote Reply  

 Posted: Wed Nov 3rd, 2010 07:36 am
  PM Quote Reply
6th Post
RegUS_PatOff
Fellow, Academy of Sublime Masters of Appliantology


Joined: Sat Sep 24th, 2005
Location: Milwaukee, Wisconsin USA
Posts: 16509
Flavorite Brew: Indian Head. Black & White
Status: 
Offline
J4 Pin 2  Red 12v DC

J4 Pin 3 Ground



____________________
The new repair forums==> http://appliantology.org
Back To Top PM Quote Reply

Current time is 04:25 pm Tell a friend about this page... all your other friends are doing it!  
- > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > GE Profile side by side PSC23SGRC ss Top



Find Appliance Parts & Diagrams Here
Enter a model number, part number, type of appliance, brand, or even a part description.

365-day return policy on all parts ordered through this site!

FAQs | Contact | Apprenticeship | Parts | Model Number Help | Newsletter | Beer

Your Sometimes-Lucid Host:
- Home
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly, spilling my steaming entrails onto your floor."


UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1185 seconds (36% database + 64% PHP). 25 queries executed.

Web Analytics