|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Jenn-Air W276B not heating up |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Jenn-Air W276B not heating up | Rate Topic |
| Author | Post |
|---|
| Posted: Sun Sep 19th, 2010 05:41 am |
|
1st Post |
|
MrFixItAllBR Grasshopper 
|
Hey everyone, I have a Jenn Air W276B wall mount oven that is pre-heating to whatever i want, but as soon as i enter a cook time or as soon as it's done pre-heating; it shuts off and resets. I can select a cook temperature or pre-heat again, but as soon as it reaches the desired temp, it resets and turns off. I know this can be a few different things, so i was wondering if anyone had heard of this so i might be able to find a place to start diagnosing. Thanks for any advice
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Sep 19th, 2010 07:27 pm |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
Start by having a look at the control board and Relay Board. Check all connections closely. Also cant find that exact model...I have a W276 and W276W
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Mon Sep 20th, 2010 01:14 am |
|
3rd Post |
|
MrFixItAllBR Grasshopper
|
Thanks. Yea, B might not be the last letter. It's hard to read.
|
||||||||||||||
| |||||||||||||||
| Posted: Mon Sep 20th, 2010 01:51 pm |
|
4th Post |
|
Budget Appliance Repair Fellow, Academy of Sublime Masters of Appliantology
|
MrFixItAllBR wrote: Thanks. Yea, B might not be the last letter. It's hard to read. I believe the B or W at the end is just a color code, shouldn't have to worry about it unless you're looking for trim, door or console colored parts.
____________________ William Burk (Willie) Willie's Budget Appliance Repair Eureka, CA 95501 |
|||||||||||||
| ||||||||||||||
| Posted: Mon Sep 20th, 2010 10:53 pm |
|
5th Post |
|
Robin the Hood Master Appliantologist 
|
Budget Appliance Repair is correct; the "B" or "W" stand for "Black" or "White". That's an oldie...you may have some issues getting parts...good luck!
____________________ "If you want your tree to produce plenty o' fruit, you've got to cut it back from time to time. Same thing with your neural cells. Some people might call it brain damage. I call it prunin'". |
||||||||||||||
| |||||||||||||||
| Posted: Mon Sep 20th, 2010 11:30 pm |
|
6th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
ERC Link Relay Board Link 
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Wed Sep 22nd, 2010 03:38 am |
|
7th Post |
|
MrFixItAllBR Grasshopper
|
I'm getting continuity through the relays when Bake is selected, but they only stay closed for about 3 sec, then the stove resets and shuts off. There's a small black spot on the ERC where it looks like there was a short, but all solder connections and components still look good. My money is on the ERC. A bad relay wouldn't close and then open 3 sec later, would it?
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Sep 22nd, 2010 11:16 am |
|
8th Post |
|
Budget Appliance Repair Fellow, Academy of Sublime Masters of Appliantology
|
There isn't really much as far as electronics go on the relay board in that unit, and it is very seldom the problem. Your range controller is what is failing, pretty common to see one do what you're seeing.
____________________ William Burk (Willie) Willie's Budget Appliance Repair Eureka, CA 95501 |
|||||||||||||
| ||||||||||||||
Current time is 10:40 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Jenn-Air W276B not heating up | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
