|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Electrolux refrigerator model E23CS78GPS2 |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Electrolux refrigerator model E23CS78GPS2 | Rate Topic |
| Author | Post |
|---|
| Posted: Wed Sep 8th, 2010 02:50 am |
|
1st Post |
|
arvis Grasshopper
|
I have an Electrolux refrigerator model E23CS78GPS2. The icemaker and water dispenser are located in the door. The icemaker auger turns constantly and only stops when the door is opened or when the motor over heats. I am thinking the problem is one the boards in the door. Does anybody have any experience with this problem? Thanks
|
||||||||||||||
| |||||||||||||||
| Posted: Wed Sep 8th, 2010 12:31 pm |
|
2nd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology 
|
I have a manual on this unit at home, I'll review it and post some info tonight.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
|||||||||||||
| ||||||||||||||
| Posted: Thu Sep 9th, 2010 05:04 am |
|
3rd Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
The dispenser power control board is bad. Looking at the 4 black relays on the picture below, the last one on the right controls the auger motor (the relay is stuck closed) Dispenser Power Control Board Link  To access the board... Slide drip tray out Remove the 3 screws that were hidden by the tray slide dispenser front up and off Disconnect wire harness Unsnap the light socket remove 6 small screws that are holding the board into place Disconnect wiring from board Reinstall in reverse order
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
| Posted: Sat Sep 11th, 2010 05:43 am |
|
4th Post |
|
arvis Grasshopper
|
The problem was actually the control board not the power control board. I changed the control board out today and it is working correctly.
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Sep 11th, 2010 02:16 pm |
|
5th Post |
|
appl.tech.29501 Fellow, Academy of Sublime Masters of Appliantology
|
Good to know, thanks for letting us know. I haven't seen one of those fail (in that manner) yet.
____________________ If you would like to make a donation you may do so at the link below http://homepage.mac.com/zenzoidman/appl.tech.29501/ |
||||||||||||||
| |||||||||||||||
Current time is 02:29 am
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Electrolux refrigerator model E23CS78GPS2 | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
