ApplianceGuru.com:  The Samurai Appliance Repair Forums Home

FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com


Konnichiwa and Welcome!

Please register to post a question. It's FREE!

SEARCH THIS SITE
We have a bizillion pages of specific appliance repair questions and answers here just aching for the furtive caress of your engorged and tingling eyeballs. Use this search box to find ‘em.

FIND PARTS FAST
Search by part number or model number. You can also search by appliance type, brand, or even the type of part.



 Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 Tell a friend about this page... all your other friends are doing it!
New Topic Reply Printer Friendly
AGA refer..model ARD24CLT repair  Rate Topic 
AuthorPost
 Posted: Thu May 21st, 2009 03:44 pm
  PM Quote Reply
1st Post
certified tech group 51
Sublime Master of Appliantology


Joined: Mon Mar 10th, 2008
Location: Tidewater, Oregon USA
Posts: 839
Flavorite Brew: natural ice
Skype: 
Status: 
Offline
  • Did a  service call on a AGA undercounter refer. Complaint..." not getting cold..only the lights are on "...   No service manuals available from anywhere, so off I went...The wire diagram was posted on the rear of the unit...Lights on but nothing else, no compressor, no power to inverter, no power at the little white box with a small LED....

I  called AGA and the tech said that they do not have any service manuals, they want you to call in and talk to them......I told him of the problem and he said to test the thermisters.......Bad thermisters ,no signal from inverter board to the compressor, I said the inverter led was not on..They sent a new inverter board plus a evoporator themister and a defrost themister









The inverter board installed, only four inches high, all the way to the rear of unit.........






 



Evap panal thermister, behind the panel, of course........






Two differant thread sizes, glad I had my trusty tap and handle...( see tool box- need threads )  The defrost them. is located on the right side, above the lower drawer rail....Installed all of the parts, reassembled the unit, plugged it in pushed start and it started.......... Remember it is pronounced A-GA

Last edited on Thu May 21st, 2009 05:02 pm by RegUS_PatOff

Back To Top PM Quote Reply  

Current time is 05:06 pm  
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > AGA refer..model ARD24CLT repair Top



FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com

Your Sometimes-Lucid Host:
ApplianceGuru.com:  The Samurai Appliance Repair Forums Home
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly, spilling my steaming entrails onto your floor." Skype Me™!

Appliance theme by Di @ Data 1 Systems
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1823 seconds (20% database + 80% PHP). 26 queries executed.