| Model 561 with freezer on the left side and the fresh food on the right side..... The work is done from the inside, start with opening the right door, mark the shelf and drawer locations ( for reinstalling later )......On the right side remove the drawers and the shelfs, remove the light lens, remove the fan cover, remove the rear panel, (The large flat panel at the rear ) See page 4-48 and 4-49 for items .... When the items are removed, what you are looking at is a small version of a car radiator, look at page 4-51 Item #78 What does it look like ...If the unit is running , is there a coating of frost from top to bottom, left side to the right side?????? P.S. did you down-load the sevice manual ?? P.P.S. can you post a picture of the evap panel for us to view ??.............................................P.P.S.S. Almost forgot.. Remove power first.. look on page 4-49 remove the grill Item #1 look all the way to the left there is a power connector, just unplug it, it kills the power to the whole unit.........After you get the panel removed, the cold control will stay....hang the cold control from the rear wall with a piece of duct tape and be sure to put a piece of electrical tape around the electrical contacts so that they cannot touch anything...... DO NOT kink or bend the capillary tubes attached to the cold controls..... Plug the connector back together watch the panel............... Last edited on Sun May 24th, 2009 02:53 pm by certified tech group 51
|
