|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > sears gas range, model 362.75980891 |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! | Page: 1 2 3   |
|
||||||||||||
| sears gas range, model 362.75980891 | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Jan 31st, 2009 07:37 pm |
|
1st Post |
|
donalda Senior Apprentice Appliantologist
|
I heard a pop sound, breaker tripped. After resetting breaker, burners worked but oven & broiler did not work. Opened panel display and looked for signs of burned wire but didn't see anything amiss.
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 31st, 2009 07:55 pm |
|
2nd Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology 
|
I'm suspecting an element blowout. Start by killing power to the range and inspecting each element carefully with a flashlight. Then you'll graduate to ohm tests. Last edited on Mon Feb 2nd, 2009 04:34 am by Samurai Appliance Repair Man ____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 31st, 2009 08:06 pm |
|
3rd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
Samurai Appliance Repair Man wrote: I'm suspecting an element blowout...maybe a little too much Kirin Ichiban (or not enough)  .... looking for more info on the GE Roper Kenmore 362.75980891 Gas Oven... Were you using the Oven at the time ? Last edited on Sat Jan 31st, 2009 08:27 pm by RegUS_PatOff ____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 31st, 2009 08:10 pm |
|
4th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
Ahh, gas range, domo for the gentle reminder, Sublime Master Reg. Definitely not enough Kirin.  OK, donalda, let's get back on track. Do you have the wiring diagram/tech sheet and a multi-meter?
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 31st, 2009 08:34 pm |
|
5th Post |
|
donalda Senior Apprentice Appliantologist
|
Yes I have wiring diagram and multi meter. I believe the oven was on. We had just taken dinner out of oven.
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 31st, 2009 08:38 pm |
|
6th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
The Oven Ignitor may have broken and shorted to the Oven. If you could do some resistance (OHMS) tests. The Ignitor should read somewhere 40 OHMS to 400 OHMS. If you could scan and upload the wiring diagram, that may help. (200k MAX)
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 31st, 2009 09:09 pm |
|
7th Post |
|
donalda Senior Apprentice Appliantologist
|
igniter looks good and continuity checks ok.
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 31st, 2009 09:35 pm |
|
8th Post |
|
donalda Senior Apprentice Appliantologist
|
the little handle that turns the gas on/off valve came off the valve. Any ideas, other than taking valve out, that would help in getting the handle back on the valve?
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 31st, 2009 10:21 pm |
|
9th Post |
|
donalda Senior Apprentice Appliantologist
|
forget about the gas valve question. Stuck a pencil eraser in the other end and pushed valve out enough to hook handle back on. Just got valve back on, reinsstalled igniter and tried to light oven. Igniter didn't heat up on either oven or broiler. Burners work ok. How do we test the erc control to determine whether that is the pop sound and the breaker tripping?
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 31st, 2009 10:32 pm |
|
10th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
I don't know untill (if) I can find a Wiring Diagram/Tech Sheet for that model ...
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 31st, 2009 11:09 pm |
|
11th Post |
|
donalda Senior Apprentice Appliantologist
|
We have a wiring diagram.
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jan 31st, 2009 11:31 pm |
|
12th Post |
|
donalda Senior Apprentice Appliantologist
|
Can fax wiring diagram.
|
|||||||||||||
| ||||||||||||||
| Posted: Sat Jan 31st, 2009 11:51 pm |
|
13th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
could post it here if 200k MAX or scan & email Last edited on Sun Feb 1st, 2009 01:04 am by RegUS_PatOff ____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
||||||||||||||
| |||||||||||||||
| Posted: Sun Feb 1st, 2009 12:36 am |
|
14th Post |
|
donalda Senior Apprentice Appliantologist
|
I understand we could remove the ERC control and take it to a parts store to be tested to see if the ERC for oven & broiler is defective.
|
|||||||||||||
| ||||||||||||||
| Posted: Sun Feb 1st, 2009 12:37 am |
|
15th Post |
|
donalda Senior Apprentice Appliantologist
|
Forgot to ask about the transformer. Says dangerous--do not touch. Is there a way to ground it out to get rid of danger.
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Feb 1st, 2009 01:03 am |
|
16th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
unplug the Range
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sun Feb 1st, 2009 01:08 am |
|
17th Post |
|
donalda Senior Apprentice Appliantologist
|
Thanks for your replies. Any thoughts on taking the ERC to an appliance store to have ERC tested for problems?
|
||||||||||||||
| |||||||||||||||
| Posted: Sun Feb 1st, 2009 01:15 am |
|
18th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
donalda wrote:I understand we could remove the ERC control and take it to a parts store to be tested to see if the ERC for oven & broiler is defective. Where did you acquire this understanding? It is false. Fax your wiring diagram/tech sheet to me and I'll post it here. 1-866-315-4504.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
|||||||||||||
| ||||||||||||||
| Posted: Mon Feb 2nd, 2009 03:19 am |
|
19th Post |
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology
|
Got the fax of your wiring diagram. Do you have the schematic as well? And make sure you select high resolution when you send the fax-- the wiring diagram is marginal.
____________________ To ask a question, use our new forums==> http://appliantology.org 365-Day No-Hassle Return Policy on all parts purchased through this site, even electrical parts that have been installed! |
||||||||||||||
| |||||||||||||||
| Posted: Mon Feb 2nd, 2009 03:34 am |
|
20th Post |
|
donalda Senior Apprentice Appliantologist
|
schematic has been faxed. Thanks
|
|||||||||||||
| ||||||||||||||
Current time is 04:21 am
|
Page: 1 2 3 |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > sears gas range, model 362.75980891 | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
