|
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com |
Konnichiwa and Welcome!Please register to post a question. It's FREE!
|
| Moderated by: RegUS_PatOff, Pegi, appl.tech.29501 |
|
|
|||||||||||||
| GE Microwave | Rate Topic |
| Author | Post |
|---|
| Posted: Tue Oct 7th, 2008 11:48 am |
|
1st Post |
|
ncc1701e Senior Apprentice Appliantologist
|
GE Microwave Model# SCB2001KSS 02 Gives 'F3' code. Info sheet does not contain descriptions of codes so intuitively I disconnected the ribbon cable between the touchpad and the main board and turned the breaker back on to see if the code returns. But with the ribbon disconnected I didn't get any display at all the display was dead. so i reconnected the cable and turned is back on and the F3 was gone and proper operation returned. so I wondered if fiddling with a possibly loose ribbon cable cause the 'correction' in the state of the machine. so I left it at that. A couple weeks went by and the F3 code has returned. Does any one know what it means? thanks
|
||||||||||||||
| |||||||||||||||
| Posted: Tue Oct 7th, 2008 01:32 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
F3 Key panel shorted (> 60 seconds) Attachment: Page from 31-9057 Advntm.png (Downloaded 18 times)
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” (also in HQ) http://www.youtube.com/watch?v=-EBiLyYXMiA Upon leaving this Earth "Do you want the Smoking or Non-Smoking section ?" |
|||||||||||||
| ||||||||||||||
| Current time is 12:31 pm | |
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > GE Microwave | Top |
FAQs | Parts | Service | Store | Newsletter | Sitemap | Beer | Fixitnow.com