| Author | Post |
|---|
jetspeed Apprentice Appliantologist
| Joined: | Wed Oct 1st, 2008 |
| Location: | Cincinnati, Ohio, USA |
| Posts: | 3 |
| Flavorite Brew: | samuel smith's oatmeal stout |
| Status: |
Offline
|
|
Posted: Fri Oct 3rd, 2008 12:52 |
|
I have an Arctica PSC23NSTA s/n FL439828. Built in fridge temp reading was erratic, trending warmer over a few days. Set a secondary thermometer and confirmed displayed temp was inaccurate by as much as 10 degrees f. Ran diagnostics, 0 3 failed, all others passed. Pulled freezer panel and found normal frost.
Are there any further troubleshooting steps I should take? If not, what exactly do I need to replace?
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology

|
Posted: Fri Oct 3rd, 2008 14:50 |
|
| Check the thermistor resistances in both the freezer and the beer compts. See the attachment for resistance values. Attachment: Pages from 31-9091Mngrm SxS Electrnc 2002 thermistor values.pdf (Downloaded 6 times)
____________________

Love? beer.fixitnow.com
|
jetspeed Apprentice Appliantologist
| Joined: | Wed Oct 1st, 2008 |
| Location: | Cincinnati, Ohio, USA |
| Posts: | 3 |
| Flavorite Brew: | samuel smith's oatmeal stout |
| Status: |
Offline
|
|
Posted: Fri Oct 3rd, 2008 15:07 |
|
Thanks, I'll give that a try. The "jelly roll" condenser is covered with dust, but most of it isn't accessible for cleaning. Any tips?
|
Samurai Appliance Repair Man Fermented Grand Master of Appliantology

|
Posted: Fri Oct 3rd, 2008 15:13 |
|
| Good observation! A condenser packed with fuzzy gookus will cause erratic temps, fer sher. I don't know what brainiac designed these things but they are a next to impossible to clean in any normal way. The most effective, and also most inconvenient method to clean these is to blow them out with compressed air. The refrigerator should be moved outside the house before doing this.
____________________

Love? beer.fixitnow.com
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology

| Joined: | Sat Sep 24th, 2005 |
| Location: | Milwaukee, Wisconsin USA |
| Posts: | 4490 |
| Flavorite Brew: | A & W in a frosted mug |
| Status: |
Offline
|
|
Posted: Fri Oct 3rd, 2008 16:43 |
|
Vapco (and others) make a water-based, non-rinsing Foaming Cooling Coil Cleaner.
Vapco FCC-1 catalog page 5 (PDF page 8)
http://www.vapcoproducts.com/catalogPDF/2006prodcatalog.pdf
Last edited on Fri Oct 3rd, 2008 16:44 by RegUS_PatOff
____________________ RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw
my “Easter Seals Walk With Me” video production http://www.youtube.com/watch?v=-EBiLyYXMiA
After leaving this Earth "Do you want the Smoking or Non-Smoking section ?"
|
 Current time is 12:01 | |
|