|
|
Air Conditioners | Dehumidifiers | Dishwashers | Disposals | Dryers | Freezers | Humidifiers | Ice Makers | Microwave Ovens | Ovens, Ranges, Stoves | Refrigerators | Trash Compactors | Washers | Water Filters |
|
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
|
ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Advantium SCA2000 220v Damper Door Problem |
|
| Moderated by: BrntToast, RegUS_PatOff, appl.tech.29501 | Search Our Sites for More Info! |
|
|||||||||||||
| Advantium SCA2000 220v Damper Door Problem | Rate Topic |
| Author | Post |
|---|
| Posted: Sat Jun 7th, 2008 12:30 pm |
|
1st Post |
|
RepairStan Senior Apprentice Appliantologist
|
On my Advantium 220v ( SCA2000BBB) The damper door, The door that covers the interior light during cooking, continually cycles open and closed at all times, when oven is under operation, or idle with door open. I verified that the "Damper door sensing switch" is functional. Everything else works on the unit. Does anyone have knowledge of where on the smart board the sensing takes place? Thanks for any help on this - Stanley
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jun 7th, 2008 02:13 pm |
|
2nd Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology 
|
If the damper door sensing switch shorts, or opens, the damper motor will continually cycle the damper door open and closed until one complete switch cycle is detected.
Attachment: Page from 31-9038Advtm OTR 220.jpg (Downloaded 16 times)
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jun 7th, 2008 03:33 pm |
|
3rd Post |
|
RepairStan Senior Apprentice Appliantologist
|
Thanks - I checked both switches (CN2 Terminal 1 & 5, CN2 Terminal 3 & 5 on the schematic) while manually moving the damper door, and opening and closing the oven door, and both checked out. Based on your comments and my findings, I am thinking that I have smart board problem. I also verified that the Hood TCO that is part of that circuitis functioning ( easy, because it is normally open). Thanks for the input, Stanley
|
||||||||||||||
| |||||||||||||||
| Posted: Sat Jun 7th, 2008 03:51 pm |
|
4th Post |
|
RegUS_PatOff Fellow, Academy of Sublime Masters of Appliantology
|
With the Microwave unplugged. you could check to see if the relay contacts are shorted. RY10 (relay common is neutral)
____________________ The new repair forums==> http://appliantology.org RegUS_PatOff http://www.youtube.com/watch?v=oPAY2LsKVEw my video production: “Easter Seals Walk With Me” http://www.youtube.com/watch?v=-EBiLyYXMiA |
|||||||||||||
| ||||||||||||||
| Posted: Sat Jun 7th, 2008 04:27 pm |
|
5th Post |
|
RepairStan Senior Apprentice Appliantologist
|
RegUS_PatOff, Thanks again - Per your suggestion, Just checked RY10 - it is not shorted. Stanley
|
||||||||||||||
| |||||||||||||||
Current time is 06:26 pm
|
|
| ApplianceGuru.com: The Samurai Appliance Repair Forums > Do-It-Yourself Appliance Repair Help > The Kitchen Appliance Repair Forum > Advantium SCA2000 220v Damper Door Problem | Top |
| Find Appliance Parts & Diagrams Here |
| Enter a model number, part number, type of appliance, brand, or even a part description. |
|
365-day return policy on all parts ordered through this site! |
FAQs | Contact | Apprenticeship | Consultations | Parts | Model Number Help | Newsletter | Beer | Fixitnow.com
